Savant Digital Flow Meter 3/8″ NPT for Water Filter

Price: $28.99
(as of Sep 22, 2024 18:32:27 UTC – Details)

Savant Digital Water Meter 3/8″ NPT with LCD Display – 8000T
The DigiFlow 8000T can monitor a single filter – flow volume or time elapsed. Users can program the flow volume and time by themselves. The DigiFlow 8000T will count down from the programmed flow volume or time value, and generate an audible alert when it reaches the end.
⚡Electrical⚡:
Operating Voltage: 3 DC Volts
Operating Current: 1.0 mA (work), 0.015 mA (sleep)
💧Flow Rate💧:
3.72 gpm, 14.1 lpm
Min. 0.40 gpm, 1.5 lpm
⚙️General⚙️ :
Temperature : 0~40℃ (32~104 ℉)
Pressure : Max. 6.0 bar (85 psi)
Weight : 140 g (5.38 oz)
Accuracy : +/- 10%
Connection : 3/8 inch NPT Female
📦️Content 📦️:
1. User Manual
2. AAA alkaline batteries x2
3. Quick fitting 1/4″OD-3/8″NPT@2PCS
4. Quick fitting 3/8″OD-3/8″NPT@2PCS
📢Instruction of selecting Gallon mode:
1️⃣Press and hold the ‘RESET’ button for about 8 seconds until the data resets to zero and then release.
2️⃣Wait for the display to turn off, then remove the battery.
3️⃣Keep pressing the “RESET” button when re-install batteries.
4️⃣Release the button when you hear a long “beep” sound.
5️⃣The mode has now been successfully changed.
6️⃣Allow the screen to turn off to save this mode change.
⚠The minimum water flow rate is 0.3 gallon/min.
⚠ It must be installed before the Faucet and the outlet of the water purifier.
⚠If you are using an RO system, it should be installed after the pressure tank.
Package Dimensions ‏ : ‎ 4.41 x 3.9 x 2.72 inches; 8.61 ounces
Item model number ‏ : ‎ 8000T
Batteries ‏ : ‎ 2 AAA batteries required. (included)
Date First Available ‏ : ‎ May 28, 2020
Manufacturer ‏ : ‎ Savant Electronics Inc
ASIN ‏ : ‎ B08BCNHKC4
Country of Origin ‏ : ‎ Taiwan

FAST AND EASY INSTALLATION: Choose the quick fitting (1/4″ or 3/8″) that meets your needs, connect it to the hose you want to measure, and the installation is complete! ⚠️If you are using an RO system, it should be installed after the pressure tank.
COUNTDOWN DESIGN: Freely set the target water consumption or the number of days of water consumption as needed. The countdown design allows you to monitor exactly when the water flow stops. No more worrying about exceeding your planned water consumption or forgetting to change the filter on time.
HEALTH STARTS WITH PURE WATER: When the set target water usage is below 30 gallons or less than 7 days, the buzzer will beep once. When the target water usage or days have reached zero, the buzzer will beep twice and the display will flash. The alarm will sound again when the product detects water flow, effectively reminding you to replace the filter and ensuring clean drinking water at all times!
LCD DIGITAL DISPLAY: You can choose liters/gallons or days as the measurement unit. ⚠️ To switch between liters and gallons — press and hold the ‘RESET’ button for about 8 seconds until the data resets to zero and then release. Wait for the display to turn off, then remove the battery. Press and hold the ‘RESET’ button again while reinstalling the battery. Release the button when you hear a long “beep”. The mode has now been successfully changed. Allow the screen to turn off to save this mode change.
AUTOMATIC MEMORY: When the battery is low, the buzzer will sound two warning beeps. If the battery is drained or unplugged, the last data will be saved automatically, so you don’t have to worry about losing or forgetting your data.